Control Valve Manifold Dimensions
This table defines the dimensions of a control valve manifold. AutoRouter uses these dimensions to design the manifolds. The dimensions (ATTRIBUTE) are dependent on valve size and pressure class.
As shown in the Figure, the dimensions are:
- A: the horizontal width of the manifold,
- B: The height from the valve center to the bypass line center,
- Y: is the length of the control valve itself.
Note: In
PlantWise versions earlier than 5.0.19,
the
Control Valve Properties data table contained two B columns:
B-With-Fins and B-No-Fins. The B-no-fins column was obsolete and removed. For
compatibility,
PlantWise looks for a B-With-Fins column
– the column actually used – first. If that column is not in the table, then
the B column is used.